6005 aluminium alloy
6005 aluminium alloy is an alloy in the wrought aluminium-magnesium-silicon family (6000 or 6xxx series). It is closely related, but not identical, to 6005A aluminium alloy. The main difference between the two alloys is that 6005 has a higher minimum composition percentage of aluminium than 6005A (while having essentially the same maximum). The most common forming method is extrusion. It can also be forged or rolled, but as a wrought alloy it is not used in casting. It cannot be work hardened, but is commonly heat treated to produce tempers with a higher strength at the expense of ductility.
Alternate names and designations include AlSiMg and A96005. The alloy and its various tempers are covered by the following standards:
· ASTM B 221: Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
· EN 573-3: Aluminium and aluminium alloys. Chemical composition and form of wrought products. Chemical composition and form of products
· EN 755-2: Aluminium and aluminium alloys. Extruded rod/bar, tube and profiles. Mechanical properties
· ISO 6361: Wrought Aluminium and Aluminium Alloy Sheets, Strips and Plates
Provide all grade of these alloy by different shape & size is Our expertise
For any inquiry & request, don't hesitate to contact us
Chemical Composition
The alloy composition of 6005 aluminium is:
· Aluminium: 97.5 to 99.0%
· Chromium: 0.1% max
· Copper: 0.1% max
· Iron: 0.35% max
· Magnesium: 0.4 to 0.6%
· Manganese: 0.1% max
· Silicon: 0.6 to 0.9%
· Titanium: 0.1% max
· Zinc: 0.1% max
· Residuals: 0.15% max
Properties
Typical material properties for 6005 aluminium alloy include:
· Density: 2.70 g/cm3, or 169 lb/ft3.
· Young's modulus: 69 GPa, or 10 Msi.
· Ultimate tensile strength: 190 to 300 MPa, or 28 to 44 ksi.
· Yield strength: 100 to 260 MPa, or 15 to 38 ksi.
· Thermal Expansion: 23 μm/m-K.
Availability
Provide all grade of these alloy by different shape & size is Our expertise
For any inquiry & request, don't hesitate to contact us
Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.