From Wikipedia, the free encyclopedia

5154 aluminium alloy is an alloy in the wrought aluminium-magnesium family (5000 or 5xxx series). As an aluminium-magnesium alloy, it combines moderate-to-high strength with excellent weldability. 5154 aluminium is commonly used in welded structures such as pressure vessels and ships. As a wrought alloy, it can be formed by rolling, extrusion, and forging, but not casting. It can be cold worked to produce tempers with a higher strength but a lower ductility. It is generally not clad.

Alternate names and designations include AlMg3.5, N5, and A95154. The alloy and its various tempers are covered by the following standards:

·         ASTM B 209: Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate

·         ASTM B 210: Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes

·         ASTM B 211: Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire

·         ASTM B 221: Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes

·         ASTM B 547: Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube

·         ISO 6361: Wrought Aluminium and Aluminium Alloy Sheets, Strips and Plates

The alloy composition of 5154 aluminium is:

·         Aluminium: 94.4 to 96.8%

·         Chromium: 0.15 to 0.35%

·         Copper: 0.1% max

·         Iron: 0.4% max

·         Magnesium: 3.1 to 3.9%

·         Manganese: 0.1%

·         Silicon: 0.25% max

·         Titanium: 0.2% max

·         Zinc: 0.2% max

·         Residuals: 0.15% max

 

Provide all grade of these alloy by different shape & size is Our expertise

For any inquiry & request, don't hesitate to contact us

Typical material properties for 5154 aluminum alloy include:

·         Density: 2.66 g/cm³, or 166 lb/ft³.

·         Young's modulus: 69 GPa, or 10 Msi.

·         Electrical conductivity: 32% IACS.

·         Ultimate tensile strength: 230 to 330 MPa, or 33 to 48 ksi.

·         Thermal Conductivity: 130 W/m-K.

·         Thermal Expansion: 23.9 μm/m-K.

Technical Data Sheet

 

Aluminium Alloy 5154 primary constituent is magnesium which gives this non heat treatable alloy its moderate strength. Alloy 5154 combines its strength with excellent formabiltiy and corrosion resistance and is regularly used in wire form but is now becoming popular for use with cold heading applications, specifically in solid, semi-tubular and tubular rivets. Alloy 5154 is an all purpose alloy that meets a broad range of needs.

Provide all grade of these alloy by different shape & size is Our expertise

For any inquiry & request, don't hesitate to contact us

 

Typical Mechanical Properties

 

Aluminium Alloy 5000

Specifications
Similar Specifications:
BS N5
Alcan GB-54S
Alcoa-520
AWCO-27
Birmabright-BB3
Duricilium-B
Hiduminium-33
BA 27
Peraluman-350

Provide all grade of these alloy by different shape & size is Our expertise

For any inquiry & request, don't hesitate to contact us

Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.