5005 aluminium alloy
5005 aluminium alloy is an aluminium alloy with good resistance to atmospheric corrosion. It is used in decorative and architectural applications
It is a member of the 5000 series of aluminum-magnesium wrought alloys. As such, it is not used in casting. It can attain moderate to high strength by cold working, and has relatively high welded strength compared to other aluminum alloy families. Tempers H116 and H321 can be used in fresh and salt water.
Chemical Composition
The alloy composition of 5005 is:
· Aluminum: 97.0 to 99.5%
· Chromium: 0.1% max
· Copper: 0.2% max
· Iron: 0.7% max
· Magnesium: 0.5% - 1.1%
· Manganese: 0.2% max
· Residuals: 0.15% max
· Silicon: 0.3% max
· Zinc: 0.25% max
Provide all grade of these alloy by different shape & size is Our expertise
For any inquiry & request, don't hesitate to contact us
Technical Data Sheet
Chemical Composition Limits |
||||||||||
Weight% |
Al |
Si |
Fe |
Cu |
Mn |
Cr |
Mg |
Zn |
Others Each |
Others Total |
5005 |
Bal |
0.30 max |
0.70 max |
0.20 max |
0.20 max |
0.10 max |
0.50 / 1.10 |
0.25 max |
0.05 max |
0.15 max |
Typical Mechanical Properties
Material |
Temper |
Tensile Strength (N/mm²) |
Yield Strength (N/mm²) |
Elongation on 50mm (%) |
|||
0.5 mm |
0.8 mm |
1.3 mm |
2.6mm |
||||
5005 |
0 |
95-145 |
- |
18 |
20 |
21 |
22 |
5005 |
H12 |
125-170 |
80 |
4 |
5 |
6 |
8 |
5005 |
H14 |
145-185 |
100 |
3 |
3 |
5 |
6 |
5005 |
H18 |
185 min |
165 |
1 |
2 |
3 |
3 |
Aluminium Alloy 5000
Alloy Designation |
UK |
US |
US Federal |
European |
Other |
5005 |
BS N41 5005 |
|
|
|
A-G0.6 - 5005 |
5052 |
|
AMS 4004 5052 Strain Hardened Foil |
QQ-A-225/7 5052 Cold finished bar |
|
|
5056 |
BS 3 L58 Alloy 5056 A Rivet Stock |
AMS 4182 5056-0 Wire |
QQ-A-430 5056-0 Rivet wire |
WS 3.3555 |
A-G5M |
5083 |
BS N8 Alloy 5083 Sheet and Plate |
AMS 4056 5083-0 Sheet and Plate |
QQ-A-200/4 5083 Extruded bar, tube |
WS 3.3547 |
AlMg4.5Mn |
5154 A |
BS N5 Alloy 5154A |
|
|
|
|
5251 |
BS 5L44 Alloy 5251 Forging Stock and Forgings |
|
|
WS 3.3525 |
A-G2M |
5454 |
BS N51 Alloy 5454 |
|
QQ-A-250/10 5454 Sheet and Plate |
WS 3.3537 |
A-G2.5MC |
5554 |
BS N52 Alloy 5554 |
|
|
|
|
5556A |
BS N61 Alloy 5556A Wire MIG and TIG |
|
|
|
|
Provide all grade of these alloy by different shape & size is Our expertise
For any inquiry & request, don't hesitate to contact us
Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.