1060 aluminium alloy is an aluminium-based alloy in the "commercially pure" wrought family (1000 or 1xxx series). It is fundamentally very similar to 1050 aluminium alloy, with the difference coming down to 0.1% aluminium by weight. However, while both 1050 and 1060 are covered by the same ISO standard, they are covered by different ASTM standards.

As a wrought alloy, it is typically formed by extrusion or rolling. It is commonly used in the electrical and chemical industries, on account of having high electrical conductivity, corrosion resistance, and workability. It has low mechanical strength compared to more significantly alloyed metals. It can be strengthened by cold working, but not by heat treatment.

Alternate designations include Al99.6 and A91060. It is described in the following standards:

·         ASTM B 209: Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate

·         ASTM B 210: Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes

·         ASTM B 211: Standard Specification for Aluminum and Aluminum-Alloy Bar, Rod, and Wire

·         ASTM B 221: Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes

·         ASTM B 483: Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Pipe for General Purpose Applications

·         ISO 6361: Wrought Aluminium and Aluminium Alloy Sheets, Strips and Plates

The alloy composition of 1060 aluminium is:

·         Aluminium: 99.6% min

·         Copper: 0.05% max

·         Iron: 0.35% max

·         Magnesium: 0.03% max

·         Manganese: 0.03% max

·         Silicon: 0.25% max

·         Titanium: 0.03% max

·         Vanadium: 0.05% max

·         Zinc: 0.05% max

 

 

 

Provide all grade of these alloy by different shape & size is Our expertise

For any inquiry & request, don't hesitate to contact us

 

Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.