5056

Sep 01, 2015

Written by SuperUser

Aluminium Alloy 5056

Technical Data Sheet

Chemical Composition Limits

Weight%

Al

Si

Fe

Cu

Mn

Cr

Mg

Mn+Cr

Ti

Zn

Others Each

Others Total

5056 USA

Bal

0.3 max

0.4 max

0.10 max

0.05/0.20

0.05 / 0.20

4.50 / 5.6

-

0.10 max

0.05 each

0.15 max

5056A EWAA

Bal

0.4 max

0.5 max

0.10 max

0.10 / 0.6

0.20 max

4.50 / 5.6

0.10 / 0.6

0.20 max

0.05 max

0.15 max

Aluminium Alloy 5056 primary constituent is magnesium which gives this non heat treatable alloy its high strength. Due to Alloy 5056 high strength and excellent formability it is used extensively in cold heading applications as well as wire forms and hinge pins. Alloy 5056 also has excellent corrosion resistance and can be used in atmospheres such as salt water where corrosion would normally be a problem with other metals.

Provide all grade of these alloy by different shape & size is Our expertise

For any inquiry & request, don't hesitate to contact us

Typical Mechanical Properties

Material	Temper	Diameter (")	Tensile Strength (ksi) min	Yield Strength (ksi) min	Elongation % in 2"
5056 Rolled, Cold finish wire/rod	0	All	46 max	-	20
5056 Rolled, Cold finish wire/rod	H111	<0.374	44	-	-
5056 Rolled, Cold finish wire/rod	H32	<0.374	44	-	-
5056 Rolled, Cold finish wire/rod	H34	<0.374	50	-	-

Aluminium Alloy 5000

Alloy Designation	UK Specifications	US Specifications	US Federal Specifications	European Specifications	Other
5005	BS N41 5005				A-G0.6 - 5005
5052 A95052		AMS 4004 5052 Strain Hardened Foil AMS 4015 5052-T0 Sheet, Plate and Foil AMS 4016 5052-H32 Sheet, Plate and Foil AMS 4017 5052-H34 Sheet, Plate and Foil AMS 4069 5052-0 Tube Drawn Seamless Close Tols AMS 4070 5052-0 Tube Drawn Seamless AMS 4071 5052-0 Tube Drawn Seamless Hydraulic AMS 4114 5052-TF Bar, Rod Rolled or Cold Finish AMS 4175 5052 Honeycomb Core (use AMS 4348) AMS 4348 5052 Core Honeycomb	QQ-A-225/7 5052 Cold finished bar QQ-A-250/8 5052-0 Sheet and plate QQ-A-250/8 5052-H32 Sheet and plate QQ-A-250/8 5052-H34 Sheet and plate WW-T-700/4 5052 Seamless tube
5056	BS 3 L58 Alloy 5056 A Rivet Stock	AMS 4182 5056-0 Wire AMS 4349 5056 Core Honeycomb	QQ-A-430 5056-0 Rivet wire	WS 3.3555	A-G5M
5083 A95083	BS N8 Alloy 5083 Sheet and Plate	AMS 4056 5083-0 Sheet and Plate	QQ-A-200/4 5083 Extruded bar, tube QQ-A-250/6 5083 Sheet and Plate	WS 3.3547	AlMg4.5Mn A-G4.5MC
5154 A	BS N5 Alloy 5154A
5251	BS 5L44 Alloy 5251 Forging Stock and Forgings BS 3L56 Alloy 5251 TubeDrawn Hydraulically Tested BS 3 L80 Alloy 5251-0 Sheet and Strip BS 3 L81 Alloy 5251-H16/H26 Sheet and Strip BS N4 Alloy 5251			WS 3.3525	A-G2M
5454 A95454	BS N51 Alloy 5454		QQ-A-250/10 5454 Sheet and Plate	WS 3.3537	A-G2.5MC
5554	BS N52 Alloy 5554
5556A	BS N61 Alloy 5556A Wire MIG and TIG

Provide all grade of these alloy by different shape & size is Our expertise

For any inquiry & request, don't hesitate to contact us

Specifications
Similar Specifications:
BS N6
Alcan GB-56S
AWCO-28
Birmabright-BB5
Duricilium-J
Peraluman-500

Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.

Welcome to Alloy center

We are specialist to provide All alloy & special alloy & high temperature & low expansion by different grade of all metals include of stainless steel, aluminium, nickel-based, titanium chromium &… by different shape (Sheet, Bar, Rod, Plate, Foil, Tube, Pipe, Wire, Mesh &… base on American & European specifications & standard by highest quality & Base on your Request.

Provide all grade of these alloy by different shape & size is Our expertise

For any inquiry & request, don't hesitate to contact us

alum 5056