1050 aluminium alloy
1050 aluminium alloy is an aluminium-based alloy in the "commercially pure" wrought family (1000 or 1xxx series). As a wrought alloy, it is not used in castings. Instead, it is usually formed by extrusion or rolling. It is commonly used in the electrical and chemical industries, on account of having high electrical conductivity, corrosion resistance, and workability. It has low mechanical strength compared to more significantly alloyed metals. It can be strengthened by cold working, but not by heat treatment.
Alternate names and designations include Al99.5, 3.0255, and A91050. It is described in the following standards:
· ASTM B 491: Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications
· ISO 6361: Wrought Aluminium and Aluminium Alloy Sheets, Strips and Plates
Chemical Composition
The alloy composition of 1050 aluminium is:
· Aluminium: 99.5% min
· Copper: 0.05% max
· Iron: 0.4% max
· Magnesium: 0.05% max
· Manganese: 0.05% max
· Silicon: 0.25% max
· Titanium: 0.03% max
· Vanadium: 0.05% max
· Zinc: 0.05% max
Provide all grade of these alloy by different shape & size is Our expertise
For any inquiry & request, don't hesitate to contact us
Technical Data Sheet
Chemical Composition Limits |
||||||||||
Weight% |
Si |
Fe |
Cu |
Mn |
Mg |
Zn |
Ti |
Al |
V |
Others |
1050A EAA |
0.25 max |
0.40 max |
0.05 max |
0.05 max |
0.05 max |
0.07 max |
0.05 max |
99.5 min |
- |
0.03 |
1050 USA |
0.25 max |
0.40 max |
0.05 max |
0.05 max |
0.05 max |
0.05 max |
0.03 max |
99.5 min |
0.05 |
0.03 |
Aluminium Alloy 1050 (1050A) is a popular grade of Aluminium. Alloy 1050 (1050A) is known for its excellent corrosion resistance, high ductility and highly reflective finish. Alloy 1050 (1050A) is typically used for chemical process plant equipment, food industry containers, pyrotechnic powder, architectural flashings, lamp reflectors, cable sheathing.
Typical Mechanical Properties
Material |
Temper |
Tensile Strength (N/mm²) |
Yield Strength (N/mm²) |
Elongation in 50mm (%) |
1050 Bar |
F |
60 (min) |
- |
23 |
Availability
Aluminium Alloy 1050 (1050 A) is available in Plate, Sheet, Strip, Bar, Wire, Drawn Tube, Welding Wire, Forging Stock and Rivet Stock. Aluminium Alloy 1050 (1050A) tube is available in many sizes from stock, however there is a minimum production of 30m. For all stock availability for alloy 1050 (1050A) contact Sales for further availability.
Aluminium Alloy 1050 A Tube is available the following size ranges.
Outside Diameter - 0.25mm (0.010") up to 16.00mm (0.625")
Wall - 0.05mm (0.002") up to 1.00mm (0.040")
Straight Lengths - 1.00mm (0.040") up to 5000.00mm (197")
Coils Lengths - 5 Metres to 15 Metres
Standard Tolerance- OD &ID +/-0.03mm (0.0012")
Wall +/- 10%
Tight Tolerance - OD&ID +/- 0.015mm (0.0006")
Wall +/-3%
Some thin wall tubes up to 25.40 mm (1.000") can be supplied.
Specifications
UNS A91050
BS - 1B and 5L36
Australia - A1050
French - A5
Germany - 3.0255 - Al99.5
Italy - UNI 9001/2
Spain - L-3051
Sweden - 4007
Provide all grade of these alloy by different shape & size is Our expertise
For any inquiry & request, don't hesitate to contact us
|
Provide all grade of these alloy by different shape & size is Our expertise
For any inquiry & request, don't hesitate to contact us
Disclaimer
Every effort is made to ensure that technical specifications are accurate. However, technical specifications included herein should be used as a guideline only. All specifications are subject to change without notice.